Trust what you hear, your perceptions are unique to you. .

iBASS  Subwoofer Interconnect Cable
In some ways, the subwoofer cable interconnect is the least demanding application in home theater. While HD video demands cables able to carry high-bandwidth signals, at tight impedance tolerances, the subwoofer cable has the relatively easy job of carrying a very low-frequency, very low-bandwidth signal. But a subwoofer cable has a critical job to do, and needs to do it well: keep out hum. Hum can come from ground loops (cable won't help you if that's the case, but see our iSUPPLY power clearifier) or, often, from EMI (electro-magnetic interference). High-energy, low-frequency noise, like the 60-cycle hum from nearby power cords, fluorescent lights, and other miscellaneous sources, is the hardest type of interference to shield against, and the best defense here is a dense and highly-conductive braid shield. Our recommended subwoofer interconnect cables have not one, but two, dense braid shields, and in our testing we've found this to be the best shield configuration, outperforming conventional single-braid, braid-and-foil, and unbalanced twisted-pair cables when it comes to hum rejection.


+ Drastically reduces signal distortion for unrivaled audio clarity using 4N oxygen-free, OFHC conductors and high-purity, silver solder joints;

+ Optimizes performance at all frequencies for consistent, exact sound reproduction using Hybrid-conductor technology;                             

+ Maintains stronger signals that yield superior sonic accuracy with precision-formulated, Polyethylene or Telfon dielectric material;             

+ Protects against wire damage for consistently high-quality audio with integrated strain relief;

+ Maintains integrity, even when bent with abrasion-resistant, flexible PE jacket with protection braid;

+ Creates precise contact for low loss with included 24K gold plated RCA plugs.

Burn-In Period

All iBass Subwoofer interconnect cables have been tested and pre burned-in at the factory. However, as with any high end audio components, it may take up to 50 hours of listening to music to reach the optimal sonic results.

4N OFHC with Vibration Control


DIAMOND Bass Plus 






Available Length & Retail Price:  

IBC-10  RCA Coaxial Cable 3.0m / 5.0m / 10.0m / 15.0m   MSRP:  $132 / $190/ $282 / $362

IBC-10 XLR   XLR Balance Cable 3.0m / 5.0m / 10.0m / 15.0m    MSRP:  $145 / $209/ $310 / $398 


RCA  Coaxial   MSRP:  $150/3m, $230 /5m, $350 /10m, $500 /15m  RCA to RCA    

XLR Balance    MSRP:  $170/3m, $250 /5m, $370 /10m, $520 /15m

DIAMOND Bass+ Plus    2014 New Product  Available Now!

RCA  Coaxial   MSRP:  $180/3m, $260 /5m, $380 /10m, $530 /15m  RCA to RCA x 2

** Due to continuous product improvement, actual product might be varied from product's picture.